HomeProfessional Super Bright Waterproof Car LED Headlight White Car Auto Bulbs Motor 880 881 9005 9006 H1 H3 H4 H7 H8 H11 HB3 HB4 (1Pc)Professional Super Bright Waterproof Car LED Headlight White Car Auto Bulbs Motor 880 881 9005 9006 H1 H3 H4 H7 H8 H11 HB3 HB4 (1Pc)
Professional Super Bright Waterproof Car LED Headlight White Car Auto Bulbs Motor 880 881 9005 9006 H1 H3 H4 H7 H8 H11 HB3 HB4 (1Pc)
*Note!!! For the convenience of logistics, our products are shipped without packaging boxes.
1Pcs x LED Headlight bulb
1. Item Type: LED Headlight Bulb
2. Light Power: 36W/Kit
3. Voltage: DC 12-24V
4. LED Quantity(each bulb): 1 pcs* CSP Chips or 1pc* CSP Chips
5. Material:Aluminum PCB and PA66+30% GF Plastic
6. Bulb Size: 880(881,H27), 9004(HB1,Hi/Lo), 9005(HB3, 9145, 9140, H10), 9006(HB4, 9012), 9007(HB5 Hi/Lo),H1, H3, H4(HB2, 9003 Hi/Lo), H7, H11(H8, H9), H13(9008, Hi/Lo)
7. Light Source Mode:High Quality CSP Chip
8. Sealed Housing:Dust Proof and Water Resistant
9. Beam Angle: 360 Beam Angle 2 pcs chips 270 low beam &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp; 360 high beam 3pcs chips
10. Color Temperature: 6000K-6500K White HeadLamps as daylight XENON HID
11. Heat Dissipation Theory:Aviation aluminum 6063T5 including Turbo cool fan
12. Operating Life: &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;50000hrs
13. Operating Temperature: -40 - +80 C
14. Connector Type:Plug and Play15.Waterproof Rating:IP68 Waterproof16. Application: Headlamp, Fog light,High beam,Low beam
15. Certifications: CE, RoHS, ISO9002, IP68
* Super bright CSP chip,360 degree clear beam no blind zone.
* Engineering beam pattern design throw light on road evenly at appropriate angle without foggy light.
* All-in-one aluminum profile as heat conduction system,360 degree heat radiating +high speed mute fan system keep the light bulb in appropriate working temperature.
* Built-in constant current CPU,instant full brightness without start-up relay.
* High speed mute fan(15000R/Min),high Air flow for faster cooling rate.
* Product structure:Frosted heatsink which designed with radiation heat dissipation and cooling paint; Tiny installation size with 360 degree adjustable socket for more vehicles.
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
* Q1: Both side could not work?
A1: Please turn around the plug (swap the polarity) and try again
* Q2: One side could not work?
A2: (1) Please turn around the plug (swap the polarity) of the defective bulb and try again
(2) Please exchange the bulbs from side to side and see if the problem could solve
(3) Please check your connection and fuse4)If still could not help, please contact our customer service, we will get back to you within 24 working hours
* Q3: Both side flicker/interference/error light?
A3: You car need a resistor Cancelers Decoders, Each car&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;#39;s original headlamp power is not the same, the system is not the same, there may be incompatible with the LED lights, it is recommended to check the car repair shop, the use of the decoder to eliminate the next fault code on it.
* Q4: My bulb type is H7, but the one you sent could not fit?
A4: You car need a bulb holder to lock the bulb, you can get one from wish according to you vehicle model
* Q5: My bulb type is H1, but there is only one clip on my bulb and the one you sent has two clip
A5: Please kindly noted that different cars have different connection way, which some have both positive and negative electrode, while some just have positive electrode but not negative. if there is just positive electrode but not negative, please connect the positive side, as for the negative wire, please connect to the car&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;#39;s metal shell.
* Q6: The bulbs is loss and it could not fit(H8/H9/H11/9005)
A6: Please put the bulb in the bulb assembly